Denon AVR-X2300W User Manual

Setting items Detailed items Description Page
.
Inputs
Input Assign Changes input connector assignment. 179
Source Rename Changes the display name for input source. 181
Hide Sources Removes from the display input sources that are not used. 182
Source Level Adjusts the playback level of the audio input. 182
Input Select Sets the audio input mode. 182
.
Speakers
Audyssey
®
Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
183
Manual Setup
Sets up the speakers manually or changes the Audyssey
®
Setup settings.
193
.
Network
Information Displays network information. 204
Connection Selects whether to connect the home network to a wireless LAN or a wired LAN. 204
Settings Used for manually setting the IP address or when using a proxy server. 208
Network Control Enables network communication in standby power mode. 210
Friendly Name The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
210
Diagnostics Used to check the network connection. 211
Contents Connections Playback Settings Tips Appendix
148
Front panel Display Rear panel Remote Index

Denon AVR-X2300W Specifications

General

Receiver type	-
Audio output channels	7.2 channels
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
Number of HDMI outputs	2
Wi-Fi	Yes