EasyManuals Logo

Denon AVR-X2500H User Manual

Denon AVR-X2500H
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
HDMI Control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
Enable the HDMI Control function of this unit.
Set “HDMI Control” to “On”. (v p. 162)
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI Control function for all devices connected
by HDMI cable.
0
Please consult the operating instructions for the connected
devices to check the settings.
0
Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input connected
to this unit.
5
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
6
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0
Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
Contents Connections Playback Settings Tips Appendix
124
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2500H and is the answer not in the manual?

Denon AVR-X2500H Specifications

General IconGeneral
HDMI in8
Composite video in2
Ethernet LAN (RJ-45) ports1
AirPlayNo
Display-
Sample rate196 kHz
HDCP version2.2
Product colorBlack
Audio decodersDSD, DTS-HD, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
Volume controlRotary
RS-232 interfaceYes
Connectivity technologyWired & Wireless
Receiver typeSurround
Frequency range20 - 20000 Hz
Output impedance8 Ω
Input sensitivity200 mV
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV, WMA
AM band range520 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportedDeezer, Napster, Pandora, SIRIUS Internet Radio, Spotify, Tidal, TuneIn, iHeartRadio
Supported graphics resolutions3840 x 2160
Weight and Dimensions IconWeight and Dimensions
Depth340.3 mm
Width434.3 mm
Height167.6 mm
Weight9389 g

Related product manuals