Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to I can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2.
A
Input source (v p. 67)
B
Volume (v p. 68)
C
Sound mode (v
p. 112)
D
Audyssey (Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
®
,
Audyssey Dynamic Volume
®
) (v
p. 154)
E
“Restorer” (v p. 151)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 107)
G
“Displaying your desired video during audio playback (Video
Select)” (v p. 109)
H
“Adjusting the picture quality for your viewing environment
(Picture Mode)” (v
p. 110)
I
“HDMI Video Output” (v p. 165)
0
Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0
Tuner / Internet Radio Station
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
“Quickz Memory” or “Z2 Quickz Memory” appear on
the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
o
Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Quick Select Names”.
(v p. 209)
Contents
Connections Playback Settings Tips Appendix
131
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
