Denon AVR-X4400H Manual

z1
This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby
speaker.
z2
The default sound mode for the AirPlay playback is
“Direct”.
z3
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z4
This item can be selected if the Auro-3D signal contains Dolby TrueHD.
z5
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z6
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
z7
This item can be selected when the input signal is DTS-HD Master Audio.
z8
This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.
z9
This item can be selected when the input signal is DTS-HD Hi Resolution.
z10
This item can be selected when surround back speakers are used.
z11
This item can be selected when the input signal is DTS 96/24.
z12
This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.
z13
This item cannot be selected if the sampling frequency of the input signal is 32 kHz.
z14
This item can be selected if the Auro-3D signal contains Multi Channel PCM.
z15
This item can be selected when the input signals contain surround back signals.
Contents Connections Playback Settings Tips Appendix
304
Front panel Display Rear panel Remote Index

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g