6
When the following screen is displayed, select “Begin
Test”
and then press ENTER.
Start the measurement of the first position.
Begin Test
Back
Select “Begin Test” to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Audyssey Setup
Ear Height
0
Measurement requires several minutes.
NOTE
0
If “Caution!”
is displayed on TV screen:
0
Go to “Error messages” (v p. 212). Check any related items, and
perform the necessary procedures.
0
If the volume level for the subwoofer is not appropriate, an error message
is displayed. See “Subwoofer level error message and how to adjust”
(v
p. 213).
7
When the detected speaker is displayed, select “Next”
and then press ENTER.
To Next Page
Loading...
