Denon AVR-X4400H Manual

Registering preset codes
There are two methods for registering preset codes; the simple method for
registering preset codes of Denon players, and the method for registering
the preset numbers of other manufacturers’ devices.
0
“Registering Denon players” (v
p. 257)
0
“Registering by entering preset numbers” (v p. 258)
o
Registering Denon players
Use the following simple method to register the preset codes of Denon
Blu-ray Disc players, DVD players and CD players.
n
Registering Blu-ray Disc players
1
Press and hold down Blu-ray and OPTION until the
DEV., TV and AVR indicators on the remote are flashing
green, then release.
n
Registering DVD players
1
Press and hold down DVD and OPTION until the DEV.,
TV and AVR indicators on the remote are flashing
green, then release.
n
Registering CD players
1
Press and hold down CD and OPTION until the DEV., TV
and AVR indicators on the remote are flashing green,
then release.
Contents Connections Playback Settings Tips Appendix
257
Front panel Display Rear panel Remote Index

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g