Denon AVR-X4400H User Manual

o
Adjusting the volume (ZONE2/ZONE3)
Use VOLUME df to adjust the volume.
0
At time of purchase, “Volume Limit” is set to “70 (–10 dB)”.
(v
p. 248)
0
Turn MASTER VOLUME after pressing ZONE2 SOURCE or ZONE3
SOURCE on the main unit to adjust the volume.
o
Turning off the sound temporarily (Muting)
(ZONE2/ZONE3)
Press MUTE :.
The sound is reduced to the level set at “Mute Level” in the menu.
(v p. 249)
0
To cancel mute, either adjust the sound volume or press MUTE :
again.
Contents
Connections Playback Settings Tips Appendix
165
Front panel Display Rear panel Remote Index

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g