EasyManuals Logo

Denon AVR-X4400H User Manual

Denon AVR-X4400H
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #205 background imageLoading...
Page #205 background image
Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
“Audyssey
®
Setup”.
You do not have to perform Audyssey
®
Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.
To set up the speakers manually, use “Manual Setup” on the menu. (v p. 216)
Audyssey
®
Setup
To perform measurement, place the Sound calibration microphone in
multiple locations all around the listening area. For best results, we
recommend you measure in six or more positions, as shown in the
illustration (up to eight positions).
When measuring the second and subsequent positions, install the Sound
calibration microphone within 2 ft (60 cm) of the first measurement position
(main listening position).
0
If you perform Audyssey
®
Setup, Audyssey MultEQ
®
XT32, Audyssey Dynamic
EQ
®
, Audyssey Dynamic Volume
®
and Audyssey LFC™ functions are enabled.
(v p. 181)
.
FL SW C FR
SRSL
Surround speaker (R)
Surround speaker (L)
Subwoofer
Center speaker
Front speaker (R)
Front speaker (L)
( :Measuring positions)
FL
FR
C
SW
SL
SR
Listening position
Contents
Connections Playback Settings Tips Appendix
205
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X4400H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4400H and is the answer not in the manual?

Denon AVR-X4400H Specifications

General IconGeneral
Display-
ECO modeYes
HDCP version2.2
Apple dockingNo
Product colorBlack
Audio decodersDTS:X, Dolby Atmos
Audio formats supportedALAC, DSD, FLAC, WAV
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Supported graphics resolutions4096 x 2160
RS-232 ports1
Connectivity technologyWireless
HDMI in8
Composite video in4
Component video (YPbPr/YCbCr) in2
Receiver typeSurround
Frequency range10 - 100000 Hz
Pre-out channels11.2
Input sensitivity200 mV
Audio output channels9.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)200 W
Power output per channel (20-20KHz@8 Ohm)125 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)710 W
Number of HDMI outputs3
Weight and Dimensions IconWeight and Dimensions
Depth389 mm
Width434 mm
Height167 mm
Weight13500 g

Related product manuals