7.1ch (Bi-Amp):
0
Setting to assign the power amplifiers
in this unit for front speaker bi-amp
connection to 2-channels.
0
You can connect speakers for up to
9.1-channels for MAIN ZONE.
Speakers to output audio are
automatically switched for playing back
up to 7.1-channels in accordance with
the input signal and sound mode.
5.1ch (Bi-Amp) + ZONE2:
0
Setting to assign the power amplifiers
in this unit for front speaker bi-amp
connection to 2-channels.
0
Setting to assign the power amplifiers
in this unit for ZONE2 to 2-channels.
7.1ch + Front B:
0
Setting to assign the power amplifiers
within this unit for connecting the
second set of front speakers.
0
You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 233)
0
You can connect speakers for up to
9.1-channels for MAIN ZONE.
Speakers to output audio are
automatically switched for playing back
up to 7.1-channels in accordance with
the input signal and sound mode.
0
When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch (Bi-Amp)” or “7.1ch +
Front B” in the menu, the assigned channels are output from HEIGHT2
speaker terminals.
0
When Assign Mode is set to “5.1ch (Bi-Amp) + ZONE2” in the menu, the front
channels for Bi-Amp connection are output from HEIGHT1 speaker terminals,
and the ZONE2 channels are output from HEIGHT2 speaker terminals.
Contents Connections Playback Settings Tips Appendix
218
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
