To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Denon AVR-X4400H and is the answer not in the manual?
General| Display | - |
|---|---|
| ECO mode | Yes |
| HDCP version | 2.2 |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS:X, Dolby Atmos |
| Audio formats supported | ALAC, DSD, FLAC, WAV |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Supported graphics resolutions | 4096 x 2160 |
| RS-232 ports | 1 |
| Connectivity technology | Wireless |
| HDMI in | 8 |
| Composite video in | 4 |
| Component video (YPbPr/YCbCr) in | 2 |
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Pre-out channels | 11.2 |
| Input sensitivity | 200 mV |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Power output per channel (1KHz@6 Ohm) | 200 W |
| Power output per channel (20-20KHz@8 Ohm) | 125 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 710 W |
| Number of HDMI outputs | 3 |
Weight and Dimensions| Depth | 389 mm |
|---|---|
| Width | 434 mm |
| Height | 167 mm |
| Weight | 13500 g |
