o
Auro-Matic Strength
Changes the level of the up-mixed channels in relation to the original
input signal.
The value ranges from 0 (no up-mixing) to 15 (Maximum level,
providing maximum effect).
0 - 15 (Default:12)
0
You can set this when the sound mode is set to “AURO-3D” or “AURO
Surround”.
0
This cannot be set if the input signal contains AURO-3D signals containing a
Height channel.
o
AURO-3D Mode
Select how to output sound to all speakers when AURO-3D decoding
is active.
Channel Expansion
(Default):
Incoming AURO-3D content is expanded
to additional speakers. All speakers
configured for AURO-3D will output
sound.
Direct:
Incoming AURO-3D content is sent
directly to each corresponding channel.
No content is sent to additional speakers.
0
You can set this when the input signal contains AURO-3D signal and sound
mode is set to AURO-3D.
Contents Connections Playback Settings Tips Appendix
190
Front panel Display Rear panel Remote Index
To Next Page
Loading...
