o
Front Layout / Middle Layout / Rear Layout / TS/CH
Select the layout setting and audio output terminals for your Height speakers.
n
Configuration
Set the speaker layout when installing 2 sets (4-channels) or more of Height, Ceiling or Dolby Atmos Enabled speakers.
The layouts that can be selected differ depending on the combinations of “Amp Assign” and floor speaker settings in the menu. (“Amp
Assign” (v p. 226), “Front/Center/Surround/Surround Back/Front Wide” (v p. 228))
[4-channel height speakers]
Settings AUDIO OUT connectors
Height Speakers NOTE Front Layout Rear Layout HEIGHT 1 HEIGHT 2
HEIGHT 3/FRONT
WIDE
4 spkrs
Front Height Top Middle Front Height Top Middle -
Front Height Top Rear Front Height Top Rear -
Front Height Surround Height Front Height Surround Height -
Front Height Rear Height Front Height Rear Height -
Front Height Surround Dolby Front Height Surround Dolby -
Front Height
Back Dolbyz1
Front Height Back Dolby -
Top Front Top Rear Top Front Top Rear -
Top Front Rear Height Top Front Rear Height -
Top Front Surround Dolby Top Front Surround Dolby -
Top Front
Back Dolbyz1
Top Front Back Dolby -
Top Middle Rear Height Top Middle Rear Height -
Front Dolby Top Rear Front Dolby Top Rear -
Front Dolby Rear Height Front Dolby Rear Height -
Front Dolby Surround Dolby Front Dolby Surround Dolby -
Front Dolby
Back Dolbyz1
Front Dolby Back Dolby -
Contents Connections Playback Settings Tips Appendix
232
Front panel Display Rear panel Remote Index
To Next Page
Loading...
