n
Connection
Select the audio output terminal(s) for each Height speaker.
Spkr + Pre-out
(Default):
Speaker and pre-out outputs are active.
Pre-out Only:
Pre-out outputs are active. Speaker
outputs are disconnected for enhanced
audio quality using only the pre-out
terminals.
0
When “Amp Assign” is set to “Preamplifier”, the “Connection” setting of all
speakers will be fixed as “Pre-out Only”.
0
When “Amp Assign” is set to “13.1ch” and 13 channels of speakers are used,
at least one of the channels assigned to the Front, Height 3 or Front Wide
must be set to “Pre-out Only”.
o
Subwoofers
Set the presence of a subwoofer.
4 spkrs: Use four subwoofers.
3 spkrs: Use three subwoofers.
2 spkrs: Use two subwoofers.
1 spkr
(Default):
Use only one subwoofer.
No:
Select when a subwoofer is not
connected.
Contents Connections Playback Settings Tips Appendix
235
Front panel Display Rear panel Remote Index
To Next Page
Loading...
