System connections
System operations can be performed when the components of the
F102 series are connected with system cables ( page 32, 33).
Match the shapes
Match the shapes then insert firmly all the way in.
• All of the system operations are controlled from the receiver (DRA-
F102/F102DAB).
• It is also possible to connect devices other than F102 series
components. In this case, however, system operations cannot be
performed.
AC 230 V, 50 Hz
Wall power outlet
NOTE:
• Do not unplug the power supply cord while the system is operating.
• The maximum total power consumption of devices connected to the CHR-F103’s AC outlets is 60 W. Do not connect devices with power
consumptions greater than 60 W.
¢ When connecting the optical digital output
connector with an optical transmission cable
(commercially available)
Receiver
[DRA-F102/
F102DAB]
(Sold separately)
Cassette deck
[DRR-F102]
(Sold separately)
CD/HDD music
system
[CHR-F103]
(This unit)
Use the LINE OUT 1 terminals
for connection to the receiver.
To Next Page
Loading...
