Denon D-107 - Advanced CD Playback Techniques; Temporary Playback Pause and Resume; Playing Specific Tracks and Cueing

23
ENGLISH
(7) Stopping playback after cueing ................................................................................ [Pause]
Cueing using the direct search function
Cueing with the programmed search
function
2 The pause mode can be set after a track is cued
using the direct search function for convenience
when recording onto a cassette tape or MD.
During playback, press the
1/3 button.
CLEAR
123
546
789
+1 0
10
TONE/SDB
REPEAT
CALL
PROG/
DIRECT
RANDOM
ENTERDISPLAY MENU
SLEEPFOLDERTITLETIME
STOP
/BAND
PLAY/PAUSE
VOLUME
PRESET
2
1
1
PLAY/PAUSE
Press the 1/3 button to start playback.
Press the number buttons or 9,
8 buttons to input the number of
the desired track.
2
PRESET
+
-
123
546
789
+1 0
10
or
Start the programmed play mode.
(See page 24.)
TUNING
TONE/SDB ENTERDISPLAY MENU
STOP
/BAND
PLAY/PAUSE
VOLUME
FUNCTIONMUTE
PRESET
+
-
3
2
1
Press the 1/3 button.
• The pause mode is set.
2
PLAY/PAUSE
Press the 9 or 8
buttons to input the
number of the desired
track.
3
PRESET
+
-
Press the 1/3 button to start playback.
(5) Stopping playback temporarily
...................................................... [Pause]
During playback,
press the 1/3
button.
+1 0
10
TONE/SDB ENTERDISPLAY MENU
SLEEPFOLDERTITLETIME
STOP
/BAND
PLAY/PAUSE
VOLUME
PRESET
+
-
1
1
1
2 Use this function to stop playback temporarily then
resume from the same point.
PLAY/PAUSE
(RC-909)(Main unit)
Press the 1/3 button to resume playback from
the point at which the pause mode was set.
(6) Playing a certain track
.......................................... [Direct search]
Press the number buttons to input
the number of the desired track.
• Playback starts from the selected track.
CLEAR
123
546
789
+1 0
10
TONE/SDB
REPEAT
CALL
PROG/
DIRECT
RANDOM
ENTERDISPLAY MENU
SLEEPFOLDERTITLETIME
POWEROPEN / CLOSE
5
1
1
[Example]
To select track 4:
To select track 12:
To select track 30:
10
+10
+10
2
+10
4
To use the direct play function during
programmed playback, first stop playback then
press the PROG/DIRECT button to cancel the
programmed play mode.
During playback, press the 1/3 button.
→ The pause mode is set.
5th track 6th track4th track
(Pause)
During pause, press the
1/3 button.
→ Playback begins.