Denon DCM-390 - Top Cover; Back Panel

4
DCM-390/290/27/500AE
DISASSEMBLY
(To reassemble, reverse disassembly)
1. TOP COVER
Remove 4 screws A fixing the Top
Cover and 5 screws A mounting the
Rear Panel, then detach the Top Cover
as shown in the arrow direction.
A
A
A
2. BACK PANEL
Remove 3 screws B mounting the
Bottom Cover and 5 screws C mounting
the Back Panel, then detach the Back
Panel as shown in the arrow direction.
Note: Only in 3x5mm, other screws
can’t be used for B .
Note: Do not yet exclude FFC (☆mark)
DCM390BKE3
ONLY
C
C
B
☆