Connecting
to
a network using
an
iOS device
• This HEOS device supports Apple's "WAC (Wireless Accessory Configuration)" setup mode. WAC setup
mode
allows you
to
connect your HEOS device
to
your network without requiring you
to
type in the network name and password.
1 . The LED
on
the rear
of
the
HEOS device will slowly blink amber
to
indicate that WAC setup mode
Is
active. If the rear LED is
not
blinking amber, press and hold VOLUME DOWN and MUTE buttons for 3 seconds until you see the LED blinking amber.
2.
Go
to
the
Wi-Fi menu under Settings on your iOS device.
3. Select "Denon DHT-S516H" under "SET UP NEW AIRPLAY SPEAKER ... " at the bottom
of
the list.
4. Select
the
network you
want
your HEOS device
to
connect
to
and select "Next".
5. Follow
the
instructions
on
the
screen
to
complete setup.
6. When the connection is complete, the LED
on
the front
of
the HEOS device will turn solid blue.
· HEOS will stay
in
WAC setup
mode
for 15 minutes. If the device is not setup within
15
minutes,
it
will revert back
to
its previous
network connection. Press the Mute button
if
you want
to
cancel WAC setup mode.
Connecting to a network using WPS
· If your wireless router support WPS (Wi-Fi Protected Setup™) your HEOS wireless device can optionally connect to your network
using the "Push Button" method
by
following these steps:
1 . Press the WPS button
on
your router.
2. Within 2 minutes, Press
and
Hold the Connect button on the rear panel
of
the HEOS device for 3 seconds.
3. The LED
on
the front
of
the
HEOS device will flash green for several seconds as
it
connects
to
your router.
4. When the connection is complete, the LED
on
the front of the HEOS device will turn solid blue.
Resetting Your Device
· Resetting your HEOS device will clear
out
the wireless network settings,
EQ,
and name
but
retain it's current software.
You will have
to
use Settings->Add Device
to
reconnect the device
to
your home network before
it
can be used.
·
To
reset your HEOS device, press
and
hold the Connect and Bluetooth buttons located
on
the back
of
the
HEOS device
for 5 seconds until the front LED begins
to
flash amber
The
HEOS
by
Denon
app
and
brand
,s
not affiliated with
any
manufacturer of any mobile device.
HEOS
and
the
HEOS
logo
are
trademarks or registered trademarks in
the
US
and/or other countries.
Apple and
the
Apple logo
are
trademarks of Apple Inc., registered
,n
the
U.S.
and
other countries. App Store
,s
a service
mark
of
Apple Inc.
Google
Play
is a trademark
of
Google
Inc.
Amazon,
Kindle,
Echo,
Alexa,
Dash,
Fire
and
all
related logos are trademarks
of
Amazon.com,
Inc.
or ,ts
affiliates.
Wi-R Protected Setup
TM
logo
,s
trademark of Wi-R
Alliance.
The
Bluetooth• word mark
and
logos
are
registered trademarks owned by the Bluetooth
SIG,
Inc.
and
any
use
of such marks by
D&M
Holdings Inc.
,s
under
license.
Other
trademarks
and
trade
names
are
those
of
their
respective owners.
All
pther trademarks are
the
property
of
their respective owners.
12
'T1
P>
To Next Page
Loading...
