Denon DHT-S516H - Playing Music from AUX Input

Playing music from the AUX input
The sound from the audio device can be played directly on the selected
speaker or digitized and sent over your network to other speakers.
1
Connect an audio device with a 3.5 mm stereo audio
output to the AUX input on your speaker using the
included 3.5 mm stereo audio cable.
When a stereo audio cable is connected to AUX IN, the source
automatically switches to Inputs.
NOTE
0
When there is a cable connected to AUX IN, select “Inputs” from the Music
tab.
2
Initiate playback on the audio device.
.
Audio signal
Contents Setup Use Troubleshooting Status LED Appendix
35