Making speaker adjustments
You can adjust specific settings for each of your DHT-S516H in your
system:
1
Select the Settings a
icon located in the upper left
corner of the main “Music”
menu to display the
Settings menu.
2
Select “My Devices” to display a list of your HEOS
devices.
3
Select the DHT-S516H you want to adjust.
Changing the name
1
Select “Name”.
2
Select or enter a new name for your DHT-S516H.
3
Tap the i icon to save your changes.
Changing the wireless network
connection
1
Select “Network”.
2
A list of wireless networks that your DHT-S516H can
access is displayed.
3
Select the network you want your DHT-S516H to join.
Wait as the DHT-S516H’s network connection is changed.
NOTE
0
Wired networking is automatically selected when the speaker is connected to a
wired Ethernet network. To switch back to using a wireless network you must
remove the Ethernet cable from the back of the DHT-S516H.
Contents Setup Use Troubleshooting Status LED Appendix
51
To Next Page
Loading...
