Denon DHT-S516H - Pairing Soundbar and Subwoofer; Re-pairing Procedure

Pairing the soundbar and subwoofer
The subwoofer and soundbar are paired at the factory. However if the
communication is interrupted, follow this procedure.
1
Press the “PAIR” Button on the subwoofer until the
Status LED flashes blue.
The soundbar power is turned on.
2
Press the “PAIR” Button on the back of the soundbar.
The Status LED on the subwoofer will be solid blue.
n
Status LED
Amber LED: Subwoofer is not paired to soundbar.
Blue LED:
Subwoofer is paired to soundbar. Your
system is ready.
Contents Setup Use Troubleshooting Status LED Appendix
59