Denon DHT-S517 - HDMI Control Standby Linking

0
When the power button is pressed while the deep standby function is on, all status
LEDs blink in white three times and this unit enter deep standby mode.
0
When the power button is pressed while the deep standby function is off, all status
LEDs blink in green three times and this unit enter normal standby mode.
NOTE
0
When this unit is in deep standby mode, it cannot be turned on by performing
streaming operations with a Bluetooth connection.
0
When this unit is in deep standby mode, the auto on control function of the optical
and AUX inputs cannot turn on the unit. (v p. 32)
Switching the standby linking via HDMI
control function on or off
In the default settings, the HDMI control automatically puts the unit into
standby mode, linked to the TV's power standby operation. When the
standby linking via HDMI control function is turned off, music playback can
continue without this unit switching to standby, even if the TV is set to
standby while a music player or other device is connected and playing.
1
Press and hold MOVIE for 5 seconds or more.
0
The standby linking via HDMI control function switches on or off
and the status LED blinks as indicated below.
Standby linking
via HDMI control
function
Off
On
(Default)
Contents Connections Playback Settings Tips Appendix
31