Denon DHT-S716H - Page 34

Proceeding :GRILL ASSY→BAFFLE ASSY→WiFi ANTENNA→MAIN PCB
(1) Remove the Rear Plate.
(2) Remove the screws.
Screws need to be tightened from the rear forward when assembling. (to prevent air from leaking)
(3) Remove the connector. Remove the screws.
(4) Remove the Cover. Remove the Cap.
5. MAIN PCB
View from the bottom
View from the bottom
x8
View from the Top
x3 x2 x8
x2
J3
J12
J9
5GHz GRY
5GHz BLK
2.4GHz GRY 2.4GHz BLK
Glue x4
View from the Top
x2
Cover
Proceeding :GRILL ASSY→BAFFLE ASSY→SMPS PCB
(1) Remove the connector. Remove the screws.
Proceeding :GRILL ASSY→BAFFLE ASSY→KEY PCB
See "EXPLODED VIEW" for instructions on removing the KEY PCB.
Proceeding :GRILL ASSY→BAFFLE ASSY→STATUS LED PCB
See "EXPLODED VIEW" for instructions on removing the STATUS LED PCB.
6. SMPS PCB
View from the bottom
x4
CN1
CN2
7. KEY PCB
8. STATUS LED PCB
34
Caution in
servicing
Electrical Mechanical Repair Information Updating