19
Control Commands
(Host → DN-700R)
CATEGORY CONTENTS CODE DESCRIPTION
Editing and
Organizing
Tracks/
Recordings
Rename File (4 digit)
@0RNnnnnXXX
X\r
Renames the file, where nnnn (the file number) =
0001–2000 and XXXX stands for a file name no
longer than 251 characters (absolute path not
required)
See Appendix > Acceptable Characters for
Serial Communication for details on which
characters can be used in the file’s new name
Advanced Audio
Settings
Lower/Raise Output
Level
@0OtXYNN\r
Adjusts the analog output volume level for either
the left or right channel, where X = L (for the left
channel) or R (for the right channel) and YNN
(the volume adjustment in multiples of 0.1 dB) =
-20 – +20
For example, to increase the volume of the left
channel by 1.5 dB, enter this code: @0ltL+15
Set Audio Output Rate
@0dFXX\r
Sets the audio output sample rate, where
X =
AT (automatic: sample rate will match that of the
audio input source/file), 44 (sample rate will be
set to 44.1 kHz), 48 (sample rate will be set to 48
kHz), EX (sample rate will be set using an
external clock for the digital signal)
Switch to Mono
@0MONN\r
Sets the audio output to mono-summed or to
match the input source, where NN = 00 (mono)
or 01 (match the input source)
Set Reference Level @0FrNN\r
Adjusts the reference level, where NN = 24 (+24
dBu for XLR / +10 dBv for RCA), 20 (+20 dBu for
XLR / +6 dBv for RCA), or 18 (+18 dBu for XLR /
+4 dBv for RCA)
Network Settings
Set Archive Server IP
@0Aixxxx\r
Sets the IP address for network archiving, where
xxxx stands for the IP address (omitting periods)
Create FTP (Archive)
Server User Name
@0Auxxxx\r
Creates a user name for the archive network,
where xxxx stands for a user name of up to 255
characters
See Appendix > Acceptable Characters for
Serial Communication for details on which
characters can be used in the user name
Create FTP (Archive)
Server Password
@0Apxxxx\r
Creates a password for the archive network,
where xxxx stands for a password of up to 12
characters
See Appendix > Acceptable Characters for
Serial Communication for details on which
characters can be used in the password
Set FTP (Archive) Server
Folder
@0Aoxxxx\r
Sets the network folder to which archived files
will be automatically saved, where xxxx stands
for the folder name (absolute path required)
Assign IP Address
@0Ipxxxx\r
Assigns a static IP address to DN-700R, where
xxxx stands for the IP address (omitting periods);
enter AUTO00000000 for the xxxx variable to set
DN-700R to be automatically assigned its IP
address
To Next Page
Loading...
Need help?
General
