Denon DN-HD2500 - Page 11

11
DN-HD2500
2.8 Heat_Run mode
Turn the Deck1 or Deck2 PARAMETERS knob
to select "Heat_Run" from the FUNCTION
check mode's top menu, then press the
PARAMETERS knob to set "Heat_Run" mode.
Verification of the heat run database is per-
formed.
"Verifying DataBase" is displayed during verifi-
cation.
Once verification is completed, "Ready" is dis-
played, then "Select Param." appears.
Be careful not to operate the panel until
"Select Param." is displayed.
--Deck1 operation--
Once "Select Param." is displayed for Deck1
and Deck2, turn the Deck1 PARAMETERS
knob and select "File Name". Next, press the
PARAMETERS knob to set "File Name".
No Mode Operation and Function Display



     

  



 

 
  
SelectParam. が表示されるまで、パネル操作
をしないようご注意ください。
  
     
   
  
 
No モード 操 作 と 機 能 表 示