13
DN-HD2500
3
DECK1 SW CHK
mode
Turn the Deck1 or Deck2 PARAMETERS knob
to select "DECK1 SW CHK" from the service
mode's top menu, then press the PARAME-
TERS knob to set "DECK1 SW CHK" mode.
"DECK1 SW CHK" mode screen appears.
When the PARAMETERS knob is pressed
while the "DECK1 SW CHK" mode is being
executed, the service mode's top menu reap-
pears.
When buttons on Deck1 are pressed, the
checkbox of the corresponding button is high-
lighted.
If the checkbox is not highlighted, there is a
problem with that button.
Once all the buttons on Deck1 have been
checked, the results of checking are displayed.
Press any Deck1’s button other than the
PARAMETERS knob, and then "DECK2 SW
CHK" mode screen appears.
No Mode Operation and Function Display
No モード 操 作 と 機 能 表 示