Denon DNP-2000NE - System Settings; Menu navigation and operation; Audio and network configuration

3
Setup
NOTE
The antennas are required for both Bluetooth and Wi-Fi functions.
1
Connect the antennas
Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear panel.
1
Turn the antenna clockwise until it is fully connected.
Do not over tighten.
2
Rotate the antenna upwards for the best possible
reception.
3
1
2
3
Optional
If you are connecting DNP-2000NE to a wired network, connect an
Ethernet cable (not included) between the player and your router.
Do not connect the Ethernet cable if you are connecting the player to
a wireless network.
1. DNP-2000NEE2_QSG_ENG_00A_230217.indd 31. DNP-2000NEE2_QSG_ENG_00A_230217.indd 3 2023/02/17 13:15:512023/02/17 13:15:51