5
Connect one end of the HDMI cable to the TV port
labeled “ARC” or “eARC”.
The DNP-2000NE does not support eARC functionality,
however you can still connect it to an eARC port to use ARC
functionality.
1
Connect the other end of the HDMI cable to the HDMI
ARC port on the back of the DNP-2000NE.
2
NOTE
• The TV connection is used to pass audio to the DNP-2000NE from your
TV's built-in sources (tuner, smart TV apps, etc.) and HDMI devices
connected to your TV. The DNP-2000NE does not generate any video
output.
• Make sure the audio output section in your TV settings menu is set
to output only 2ch PCM audio. Dolby Digital and DTS audio are not
supported.
HDMI
IN
(ARC)
3
Connect TV audio (optional)
1. DNP-2000NEE2_QSG_ENG_00A_230217.indd 51. DNP-2000NEE2_QSG_ENG_00A_230217.indd 5 2023/02/17 13:15:522023/02/17 13:15:52
To Next Page
Loading...
