Denon DNP-2000NE - Connect to the Network

7
Wireless
Select “WPS Router”.
WPS router
Wi-Fi router
Select “Wi-Fi - scan” and wait
as your DNP-2000NE looks for
available networks.
Non-WPS router
Wi-Fi router
Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
English
Select Language
:
enter
ENTER
Wi-Fi - scan
Select Connection Method
:
cancel
:
enter
ENTER
BACK
iOS device
iOS version 7
or later
Make sure your iOS device is
connected to your Wi-Fi Network.
Select the network named “Denon
DNP-2000NE” from the Settings/
Wi-Fi screen on your device.
2 3
3
3
WPS Router
Select Connection Method
:
cancel
:
enter
ENTER
BACK
Power on.
1
Power on.
1
Power on.
1
Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
English
Select Language
:
enter
ENTER
2
Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
English
Select Language
:
enter
ENTER
2
WAC - use your Apple
Select Connection Method
:
cancel
BACK
:
enter
ENTER
Denon DNP-2000NE
Denon DNP-2000NE
Choose one of the following wireless setup options or set up a wired connection as shown.
6
Connect to the network
1. DNP-2000NEE2_QSG_ENG_00A_230217.indd 71. DNP-2000NEE2_QSG_ENG_00A_230217.indd 7 2023/02/17 13:15:522023/02/17 13:15:52