Denon DRA-275RD - Block;Level Diagram; System Signal Flow Diagram

NGLISH
Besides being able to operate the DRA-375RD/275RD receiver with this remote control unit, you can
also operate a DENON cassette deck and CD player from this handy full-system remote control unit.
Remote Control Section
Full-system Remote Control Unit :
The full-system remote control unit operates all major functions of the receiver such as function switching, volume control, and preset station selection. But that’s not
all! The same control pad can also control the major functions of a DENON CD player and cassette deck to create a remarkably ergonomic and versatile DENON system
with all the quality sound reproduction that the devoted audiophile expects.
Remote Control Unit RC-812 supplied with DRA-375RD /275RD
PLAY button
PLAY (REV) button
STOP button
REWIND button
FAST FORWARD button
Refer to the
operating inst-
ructions of your
DENON tape
deck.
POWER button
PLAY button
STOP button
fh PAUSE
A/B DECK
A/B
W-DECK
SELECT
button
id<
Search
button
A/B_ @REC MIPAUSE msTop [POWER]
PANEL
button
FIJCI
CI
COC
>i
ponvare
Tec
tl PAUSE
REPEAT
RANDOM
DISC SKIP
PAUSE button
REPEAT button
RAMDOM button
DISC SKIP button
The display switches between the frequency,
manual characters, station name, programme
type and time each time this button is pressed.
fos) Galea, a)
ed MIPAUSE BSTOP BPLAY
Station names, programme types and the time
are only displayed when receiving RDS sta-
tions.
—— TAPE SELECT buttons
FUNCTION SELECTOR buttons
* TUNER button
This button is also used for RDS search and
PTY search and TP search operations.
The following may appear on the display for some For details, refer to Page 11.
stations, but this is not a malfunction:
“NO PTY”: This is an RDS broadcast, but the pro-
gram type (PTY) is not being broad-
cast.
“NO PS": — An RDS broadcast is being received,
but the PS (Programme Service name
or station name) is not being received PRESET buttons (& W)
due to weak signals, etc.
“NO TIME DATA": This is displayed when the
station currently tuned in is
not broadcasting time data,
and may be displayed for
one minute after the power
is turned on even when the
station currently tuned in is
broadcasting time data.
(The PANEL button only operates when the function
is set to the TUNER mode.)
VOLUME buttons ( )
DENN aenote controt unit RC-812 av
@ The RC-812 Remote Control Unit can control CD players and cassette decks made by DENON.
® Note that operation may not be possible for some models.
@ Buttons are conveniently separated into groups, each group controlling one specific component. The groups are RECEIVER, CD and DECK.
For details on operating other components, refer to the instruction manuals for the CD player and/or cassette deck.
CAUTION:
@ = If the power is turned off with the remote control unit, the receiver is switched to the power stand-by state. If you are to be absent for a long period of tinez, be sure
to turn the power off using the POWER switch on the receiver.
© Apart of 1st digit of fluorescent display light while the receiver is in the power stand-by state.
® You mayexperience erratic operation of the remote control unit if it is operated in fluorescent light and direct sunlight, in particular if this light strikes the renofe control
sensor on the receiver. However, this is not a malfunction, and if this should happen, protect the sensor against such light.
14