Denon DRA-F101 - Remote Control Unit (RC-927)

11
ENGLISH
RC-927
REMOTE CONTROL UNIT
CLEAR
123
546
789
10
+10
CD SRS
MDTAPE
TUNING
REPEAT
CALL
PROG/
DIRECT
RANDOM
BAND
RDS
DIMMER
TIME/
PANEL
TIME EDIT
SYSTEM
POWER
OFF ON
STOP PLAY
VOLUME
/SELECT
SLEEP MODE
TAPE
FUNCTION
PRESET
+
-
TUNER
CD
MD
TAPE
Models compatible with system remote control
• Receiver : DRA-F101
• CD player : DCD-F101
• Cassette deck : DRR-F101
• MD recorder : DMD-F101
Press this to set the DRA-F101’s
power to the standby mode.
(When connected in a system
with the D-F101 series, this
button sets the power of the
entire system to the standby
mode.)
Power standby button
(SYSTEM POWER STANDBY)
When connected in a system
with the D-F101 series, these
buttons are used to operate the
various connected system
components.
For operating instructions, refer
to the manuals of the various
components.
D-F101 series
function operation block
Press this to select the function
source to be played.
The function switches in the
following order each time the
button is pressed:
FUNCTION button
Use this to select the function to
be operated with this remote
control unit. Set to TUNER to use
the DRA-F101’s tuner function.
For instructions on operating the
various components, refer to their
respective manuals.
Remote control
function selector switch
When this button is pressed
while the DRA-F101’s power is in
the standby mode, the DRA-
F101’s power turns on.
(When connected in a system
with the D-F101 series, this
button turns on the power of the
entire system.)
Power on button
(SYSTEM POWER ON)
• Press
D
to increase the
volume,
H
to decrease it.
• These buttons are also used to
set various modes.
VOLUME/SELECT buttons
CD
MD TAPE PHONO
TUNER DVD/AUX
MODE button
2 Buttons not described here function in the same way as the corresponding buttons on the main unit.
The display becomes darker (in 4
steps) each time this button is
pressed.
Adjust the brightness of the
display according to the
brightness of the room.
DIMMER button
✽ The buttons above for which there are no explanations cannot be operated with the DRA-F101.
Press these buttons to recall
preset station.
Examples:
To call the station at preset
number 12:
Press ,
To call the station at preset
number 29:
Press , ,
9
+10
+10
2
+10
Number buttons
RDS button (RDS)
Use this button to selecting the
band.
BAND button (BAND)
FM AUTO FM MONO AM
Use these buttons to recall preset
stations on the tuner.
Press this button after selecting
“PTY” with RDS button to select
one of the 29 program types.
PRESET button (PRESET)
Press this button to set the sleep
timer
SLEEP button (SLEEP)
PANEL button (PANEL)
Use these buttons to selecting
the station.
TUNING button (•,ª)