20
ENGLISH
12
SPECIFICATIONS
2 POWER AMPLIFIER SECTION
Rated Output Power: 35 W + 35 W (4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7%)
Output terminals: 4 to 16Ω/ohms
• PRE AMPLIFIER SECTION
Input Sensitivity/
Input Impedance:
PHONO: 2.5 mV/47 kΩ/kohms
CD, DVD/AUX,
TAPE, MD: 300 mV/47 kΩ/kohms
RIAA Deviation: PHONO: 20 Hz to 20 kHz ±0.5 dB
• OVERALL CHARACTERISTICS
SN Ratio (IHF A Network): PHONO: 80 dB (at 5 mV input) (input terminals short-circuited)
CD, DVD/AUX,
TAPE, MD: 90 dB (SOURCE DIRECT: ON)
Frequency Response: 5 Hz to 80 kHz : +0.5, –3 dB (SOURCE DIRECT: ON)
Tone Control Adjustable Range: BASS: 100 Hz ±8 dB
TREBLE: 10 kHz ±8 dB
LOUDNESS: 100 Hz +8 dB
10 kHz +6 dB
2 TUNER SECTION
Reception frequency range: FM : 87.50 MHz ~ 108.00 MHz
AM : 522 kHz ~ 1611 kHz
Practical sensitivity: FM : 1.2 µV/75 Ω/ohms (12.8 dBf)
AM : 18 µV
FM stereo isolation: 40 dB (1 kHz)
FM S/N ratio: Monaural: 74 dB Stereo: 70 dB
FM harmonic distortion: Monaural: 0.3% Stereo: 0.4%
2 CLOCK/TIMER SECTION
Clock system: Power source frequency synchronization system
Clock precision (per month): ±30 seconds
Timer functions: Everyday timer (1 setting)
Once timer (1 setting)
Sleep timer (maximam 60 min.)
• OTHERS
Power Supply: AC 230 V, 50 Hz
Power Consumption: 85 W
(Approx. 1W in standby mode)
Dimensions: 250 (W) X 81.5 (H) X 285 (D) mm
Mass: 3.5 kg
• REMOTE CONTROL UNIT (RC-927)
Remote control system: Infrared pulse system
Power supply: 3 V DC, Two size R03 (“AAA”)
dry cell batteries
External dimensions: 48 (W) X 210 (H) X 29 (D) mm
Mass: 120 g
(including batteries)
• For improvement purposes, specifications and functions are subject to change without advanced notice.
To Next Page
Loading...
