Denon DRA-F107 - Switching the Reception Information for the Currently Tuned in DAB Station; Making the DAB Settings; DAB Initialize


Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting SpecificationsSystem Functions
ENGLISH
1
Perform steps 1 to 2 under “Tuning in DAB stations”
to tune in a DAB station.
2
Press [TIME/DISPLAY].
b The display switches as shown below each time the button is
pressed.
q Data Label Segment :
Text data included in the broadcast is scrolled.
w Station Name :
The service station name is displayed.
e Program Type :
The category of the tuned in station is displayed.
r Ensemble Name :
The ensemble name is displayed.
t Frequency:
The frequency is displayed.
y Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
b If the reception signal sensitivity is 80 or greater, the
program can be received without noise.
u Audio Information :
The mode of the currently tuned in station and its bit rate are
displayed.
i Data and Time :
The current date and time are displayed.
b When MENU is pressed, the set’s internal clock is updated
to the currently displayed time.
Tuning Aid
:
The reception sensitivity of the currently tuned in frequency is
displayed.
b The program can be received without noise when the cursor move
to the right of the sensitivity display.
Station Order
:
The service list is created with the auto scan function.
MULTIPLEX ALPHANUMERIC
(In order of frequency) (In alphabetical order)
DRC (Dynamic Range Control)
:
11/2Off
DAB Version
:
The DAB module’s version is displayed.
[Selectable items]
<SOURCE>
ON/STANDBY
Button located on both the main unit and the remote control
unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
[MENU]
[TIME/DISPLAY]
[DAB/RDS]
[SOURCE]
[RANDOM]
[ENTER/MEMO]
[DOCK 1/3]
[6, 7]
[8, 9]
[REPEAT]
[REMOTE/
BROWSE]
[uiop]
ON/STANDBY
1
Press [DAB/RDS] during DAB reception.
2
Select “item” using [u] and [i], then press the
[ENTER/MEMO].
1
Press [MENU] during DAB reception.
2
Select “TUNER SETUP” using [u] and [i], then
press the [ENTER/MEMO] or [p].
3
Select “DAB INITIALIZE” using [u] and [i], then
press the [ENTER/MEMO] or [p].
4
Press [ENTER/MEMO].
b Once initialization is completed, auto scanning is performed
automatically.
Switching the Reception Information for
the Currently Tuned in DAB Station
Making the DAB Settings
DAB Initialize
When the “DAB Initialize” procedure is performed, all the preset
memory settings for the stations and DABs are reset.
Listening to DAB/DAB+ (For UK Model Only)
Playback