1
Press [MENU].
2
Select “SPK OPTIMISE” using [u] and [i], then
press the [ENTER/MEMO] or [p].
3
Select “ON” using [u] and [i], then press the
[ENTER/MEMO] or [p].
The setting is entered.
DCD-F107 (CD Player)
n The DCD-F107 can be operated using the
receiver's remote control unit
(vpage 6 “Buttons for operating components connected by
system cable”)
n Auto Power On Function (v “System Function”)
n Auto Function (v “System Function”)
n Timer Function (v “System Function”)
In addition to connection of the audio cables, also connect the
system cable.
Also, connect the power cord of the DCD-F107 (CD player, sold
separately) to the AC outlet on the back of the receiver (DRA-
F107).
System cable
(Included with the
DCD-F107)
NOTE
Be sure to plug the DRA-F107’s power cord into a wall power outlet.
Other Functions
Convenient Functions
Setting the optimizing filter for the SC-
F107 speaker system (sold separately)
The receiver’s speaker output signal properties are set to be
optimal for the SC-F107.
Auto Function Selector Function
When one of the buttons below is pressed, the function switches
to the respective function and playback of that source starts.
• [DOCK 1/3] ···· The function switches to “iPod” and the iPod
starts playing.
• [TUNER] ·········· The functions switches to “TUNER” and the
band last set is tuned in.
Last Function Memory
This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.
About System Functions
Device supporting system
connections (sold separately)
When system connections are made between the DRA-F107 and
DCD-F107 (CD Player, sold separately), the operations described
below can be performed.
What you can do with the
system functions
Making system connections
DRA-F107 (This unit)
DCD-F107
To a wall power
outlet
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
To Next Page
Loading...
