12
DVD-9000/DVD-A1
Set Serial No. (lower 5 digits) Bass Manager Drive Pcom ESS Pcom Panel Pcom
1V.28
Ver. 6062
(Display) 6062
Ver. 6070
(Display) 6070
Ver. 6061
(Display) 6061
2V.28
Ver. 6062 Ver. 6077 Ver. 6061
3V.28
Ver. 6100 Ver. 6101 Ver. 6091
4
5
6
7
8
9
10
3. P.W.B. Check Mode
(1) Preparation
(a) Equipment used: None
(b) Unit setting: No spec other than the following procedure
(2) Procedure
(a) Press the "POWER" button to turn on the power while pressing the "PLAY" and "OPEN/CLOSE" buttons for DVD
operation simultaneously.
(b) FL all light/extinguish mode.
This mode is for detecting FL defects. Press "STILL/PAUSE (
)" on the remote control unit once to light all FL
segments, and press it once again to extinguish them.
(c) DVD µcom and main unit µcom firm check mode.
This mode is for displaying the status of each µcom employed.
• DVD µcom firm: Press the "MENU" button. Each time the "MENU" button is pressed, µcom firm is displayed one
after another.
Ex.: [DRV_6062, ESS_6070, PANEL 6061]