Denon Envaya Mini DSB-100 - Preparation; Unpacking

ENGLISH
2
4. Pairing additional Bluetooth Devices
q Activate the Bluetooth settings on you mobile device.
w Press and hold the 1/3 button for 3 seconds until you
hear a 3 tone beep.
e Select “Envaya Mini” from the list of available Bluetooth
devices. In a few seconds you will hear a fast 3 note
tone from the speaker indicating that it is connected
to your device. The status indicator stops blinking and
remains illuminated.
3. Playing Music from your Bluetooth Device
(Pairing and Connecting)
q Activate the Bluetooth settings on you mobile device.
w Select “Envaya Mini” from the list of available Bluetooth
devices. In a few seconds you will hear a fast 3 note
tone from the speaker indicating that it is connected
to your device. The status indicator stops blinking and
remains illuminated.
Envaya
Status indicator
Envaya
DSB-100EM_QSG_141224.indd 2 2014/12/25 14:31:57