Denon Envaya Mini DSB-100 - Wired Audio Connection

Listening to music using a wired
connection
You can enjoy listening to music from devices that do not support
Bluetooth audio by connecting to Envaya Mini using a stereo mini plug
cable (not included).
1
Press and hold X until a notification sound is heard.
The status indicator illuminates and Envaya Mini turns on.
2
Connect the AUX input connector on Envaya Mini to the
headphones jack of the portable music player using a
stereo mini plug cable (not included).
0
When a stereo mini plug cable is connected to the AUX input
connector of Envaya Mini, the input of Envaya Mini automatically
switches to AUX.
.
Stereo mini plug cable
(not included)
3
Start playing music from the device. You may need to
adjust the volume up on the connected device, then
adjust the volume on Envaya Mini.
0
Remove the stereo mini plug cable to switch to Bluetooth input.
0
Pressing the 1/3 button during AUX input mutes playback. Press
the button again to stop muting.
A status indicator blinks during muting.
Contents Preparation Connections Operation Troubleshooting Appendix
17
Index