Denon HEOS 7 HS2 - Configuring Stereo Pair Settings

5
Tap on the Stereo Pair switch to pair the two speakers.
6
Tap the Back arrow B to return to the list of Rooms.
7
Tap the Check Mark i icon to exit Edit mode.
The group of two matching speakers will now appear as a single
room. You can change the name of the stereo paired room at any
time.
.
5
6
Rooms
Drag one room into another to group them
Rooms
Now PlayingMusic
Song Name 3
Bedroom
Song Name 1
Dining L + Dining R
Song Name 2
Kitchen
Edit Group
Name Dining L + Dining R
Stereo Pair
EQ
Balance Center
Swap L&R
Contents
Setup Use Troubleshooting Status LED Appendix
31