Changing the speaker’s equalizer
1
Select “EQ”.
2
Adjust the “Treble” or “Bass” up or down.
NOTE
0
Select the Reset button to restore the default settings.
Adjusting the audio quality
Selects the transcoding option for rebroadcasting audio from one HEOS
device to another HEOS device (or group of devices) across the network.
When set to high bit rate audio sources originating from the first device
(such as analog input, WAV, FLAC and PCM) will be transcoded to ensure
the highest level of reliability for the audio stream.
1
Select “Quality”.
2
Select Normal (default) or High.
0
If you have selected High and you experience audio dropouts when streaming
sources from one device to other devices, please select Normal (default).
Adjusting the status light brightness
1
Select “Status Light”.
2
Adjust the brightness up or down or set the slider to
the OFF position to completely disable the status light.
Contents Setup Use Troubleshooting Status LED Appendix
39
To Next Page
Loading...
