Need help?Do you have a question about the Denon MC6000 MKII and is the answer not in the manual?
Details the FLANGER, ECHO, and PAN effects controls for Deck 1.
Details the FLANGER, ECHO, and PAN effects controls for Deck 2.
Covers MIC 1 & 2 levels, ON/OFF, ducking, echo, and equalizer functions.
Details the EQ knobs (Low, Mid, High) and Echo Volume for microphones.
Explains LOOP IN, LOOP OUT, LOOP LESS, and AUTO LOOP operations for Decks 1 and 3.
Explains LOOP IN, LOOP OUT, LOOP LESS, and AUTO LOOP operations for Decks 2 and 4.
Describes how to switch between Deck 1/3 and Deck 2/4 using the selector.
Details primary/secondary functions for SHIFT, DELETE, KEY LOCK, PITCH BEND, and SYNC.
Covers triggering and clearing Hot Cues and Samplers for Decks 1 and 3.
Covers triggering and clearing Hot Cues and Samplers for Decks 2 and 4.
Details CUE, BREAK, PLAY/PAUSE, REVERSE, and SCRATCH ON/OFF functions.
Notes the CENSOR/SLIP button status and its reserved future use in DEX.
Explains volume faders, channel CUE buttons, and the level meter.
Covers headphone jack, level/pan knobs, split cue, and crossfader curve/assignment.
Details source selectors, volume levels, and EQ (Low, Mid, High) for Channels 3 and 1.
Details source selectors, volume levels, and EQ (Low, Mid, High) for Channels 2 and 4.
Guides on loading tracks, track selection, and browser/playlist navigation.
Describes the ON/OFF controls for cutoff filters on Decks 1 and 2.
Explains linking audio and video crossfaders for specific DEX functions.
Details the master output volume level knob.
Covers booth output volume level and source selector.
Details the FLANGER, ECHO, and PAN effects controls for Deck 1.
Details the FLANGER, ECHO, and PAN effects controls for Deck 2.
Covers MIC 1 & 2 levels, ON/OFF, ducking, echo, and equalizer functions.
Details the EQ knobs (Low, Mid, High) and Echo Volume for microphones.
Explains LOOP IN, LOOP OUT, LOOP LESS, and AUTO LOOP operations for Decks 1 and 3.
Explains LOOP IN, LOOP OUT, LOOP LESS, and AUTO LOOP operations for Decks 2 and 4.
Describes how to switch between Deck 1/3 and Deck 2/4 using the selector.
Details primary/secondary functions for SHIFT, DELETE, KEY LOCK, PITCH BEND, and SYNC.
Covers triggering and clearing Hot Cues and Samplers for Decks 1 and 3.
Covers triggering and clearing Hot Cues and Samplers for Decks 2 and 4.
Details CUE, BREAK, PLAY/PAUSE, REVERSE, and SCRATCH ON/OFF functions.
Notes the CENSOR/SLIP button status and its reserved future use in DEX.
Explains volume faders, channel CUE buttons, and the level meter.
Covers headphone jack, level/pan knobs, split cue, and crossfader curve/assignment.
Details source selectors, volume levels, and EQ (Low, Mid, High) for Channels 3 and 1.
Details source selectors, volume levels, and EQ (Low, Mid, High) for Channels 2 and 4.
Guides on loading tracks, track selection, and browser/playlist navigation.
Describes the ON/OFF controls for cutoff filters on Decks 1 and 2.
Explains linking audio and video crossfaders for specific DEX functions.
Details the master output volume level knob.
Covers booth output volume level and source selector.
General| Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| USB Audio Interface | Yes |
| MIDI | Yes |
| Software Compatibility | Serato DJ, Virtual DJ, Traktor |
| Inputs | 4 Line |
| Outputs | 2 Headphones (1/4", 1/8") |
| USB | 1 x USB Type-B |
| Audio Interface | 24-bit/44.1 kHz |
| Software | Serato DJ Intro |
| Power Supply | AC adapter (included) |
To Next Page
