Denon PMA-1315R - Method of Adjustments; Idling Current Adjustment

BG PMA-1315R
METHOD OF ADJUSTMENTS
DC Volimeter
POWER
TRANSFORMER
VR201
IDLING CURRENT
e Setup
i 1. Lay the unit at an ordinary position away from a direct current from a cooler or fan. Do the adjustment at a temperature
between 15°C (59°F} and 30°C (86°F).
2. Set controls as follows.
POWER SWITCH-> OFF (HL)
VOLUME CONTROL- fully counterclockwise. (C> ) min. (Main volurne (VR201)
| - (VR202, 203 and 204 are center position.)
SPEAKER Terminals— open: do not connect the speakers, dummy load ete.
@ Confirm
1. Remove Top cover. And then connect DC Voltmeter to Test points of Main Unit.
2. Connect Power card to AC Outlet, and tum POWER Switch "on" (2m).
3. 10 seconds after check to see DC Voltmeter reading is 17 + 2mvV.
4. 2 minutes after re-check DC Voltmeter for 17 + 2mV reading.
12