Denon PMA-1315R - Unit Disassembly Procedures; Top Cover and Main Chassis Removal

Eg PMA-1315R
REMOVAL OF EACH SECTION
1. Top Cover
(1) Remove 6 screws (A) , and3 screws (B) . Top Caver
(2) Pull up Top Cover in arrow direction. ®
2. Main Chassis
(1) Remove 4 P.W.B. Hoider from PW. Board.
(2) Remove 2 screws (c) fixing Main Chassis and Side Bracket.
(3} Remove 5 screws (D) fixing Main Chassis and Rear Panel.
(4) Remove 4 screws (E) fixing Main Chassis and Front Panel.
(5) Remove 3 screws (F) fixing Main Chassis and Radiator Bracket.
(6) Remove 3 screws () fixing Main Chassis and Chassis Support Bracket. (D)
(7) Pull down Main Chassis in arrow direction.