Denon PMA-150H - Desired Sound Not Coming Out

Desired sound does not come out
The volume does not increase.
0
The maximum volume is set too low. Set the maximum volume using “Volume Limit” on the menu. (v p. 93)
Headphone volume is low.
0
Switch “H/P Amplifier Gain” to “High” if using headphones with high impedance or low sensitivity.
(v p. 93)
Left/right volume balance is unbalanced.
0
Press the TONE button on the remote control to adjust the “Balance”. (v p. 83)
No sound is produced from subwoofer.
0
Check the subwoofer connections. (v p. 23)
0
Turn on the subwoofer’s power.
Set values are not reflected in “Bass” and “Treble”.
0
“Bass” and “Treble” settings are not reflected in subwoofer output.
0
Press the TONE button to set “Source Direct” to “Off”. (v p. 83)
Contents
Connections Playback Settings Tips Appendix
117
Front panel Rear panel
Remote control
unit
Index