Selecting the input source
1
Press the input source select button to be played back.
The selected input source appears on the display.
0
This unit switches between DAB and FM each time TUNER is pressed.
0
Switches between Optical 1/2 each time OPTICAL is pressed.
0
Switches between Analog 1/2 each time ANALOG is pressed.
0
You can also select the input source by touching q on the main unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The volume level appears on the display.
0
You can also adjust the volume by turning the knob on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
“Mute” is displayed on the display.
0
To cancel mute, either adjust the sound volume or press MUTE : again.
Contents Connections Playback Settings Tips Appendix
35
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
