Playing CDs
This section uses playback from a CD as an example.
1
Press X on this unit to turn the power on.
2
Press the input source select buttons to switch the
input source to “CD”.
The “CD” input indicator lights.
3
Playback the CD.
4
Use VOLUME df to adjust the volume.
2 Playback in source direct mode
The signal does not pass through the tone adjustment circuitry (BASS,
TREBLE and BALANCE), resulting in playback of a higher sound quality.
1
Press SOURCE DIRECT on this unit to turn on source
direct mode.
Recording
1
Press the input source select button (CD, NETWORK,
PHONO, AUX or TUNER) to be played.
2
Set the recorder to the record mode.
3
Start playing the source to be recorded.
To Next Page
Loading...
