You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input.
Auto Standby mode is set to on by default.
AMP POWER
X
Turning Auto Standby mode o
1
Press and hold AMP POWER X for more than 5 seconds
to turn the Auto Standby mode o.
The standby indicator flashes three times.
Turning Auto Standby mode on
1
Press and hold AMP POWER X for more than 5 seconds
to turn the auto standby mode on.
The standby indicator flashes three times.
%
•If you set the Auto Standby mode while the unit is ON, the unit will enter the
standby mode as soon as the Auto Standby mode setting is completed.
•When iPod is being charged, this unit enters the power standby mode after
charging.
Setting the Auto Standby mode
To Next Page
Loading...
