Specifications
2 Power amplifier section
Rated Output Power: both channels driven (CD IN– SPEAKER OUT)
70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz, T.H.D. 0.07 %)
Dynamic power: 140 W + 140 W (4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)
High frequency distortion: 0.01 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz
Output terminals: Speaker:
A or B: 4 – 16 Ω/ohms
A + B: 8 – 16 Ω/ohms
Suited for headphones/stereo headphones
Input Sensitivity / Input Impedance: P. DIRECT: 0.84 V / 47 kΩ/kohms
Gain: 29 dB
2 Pre amplifier section
Equalizer amplifier output:
(REC OUT terminals)
150 mV
Input Sensitivity/Input Impedance: PHONO (MM):2.5 mV/47 kΩ/kohms
PHONO (MC): 200 μV/100 Ω/ohms
CD, TUNER, AUX, NETWORK, RECORDER:
125 mV/47 kΩ/kohms (SOURCE DIRECT: O)
125 mV/23 kΩ/kohms (SOURCE DIRECT: On)
RIAA Deviation: PHONO: 20 Hz – 20 kHz ±0.5 dB
Maximum Input: PHONO (MM):130 mV/1 kHz
PHONO (MC):10 mV/1 kHz
Rated Output: PRE OUT: 0.84 V (Input CD 125 mV)
To Next Page
Loading...
