Denon PMA-2000IVR - Bottom Plate Disassembly; Rear Panel Disassembly; Heat Sink Assembly Disassembly

1. Always keep the POWER switch on the main unit turned on.
2. Turn the power on and off from the remote control unit.
3. Unplug the power cord when you do not plan to use the unit for a
long period of time
If only the MUTE/STANDBY LED is lit red, this means that the
power is turned off from the remote control unit. Turn the
power on from the remote control unit.
__ _13
m DESIGNATIONS AND
FUNCTIONS OF PANEL CONTROLS ,_...................._..... ..4 -’ 7
q CONNECTIONS . . . . . ..t......................................... 7, 8
m OPERATION . . . . . . . . . . . . . . ..,.....I ,.... I.,.. 9
a REMOTE CONTROI.. OPERATION _............ ,.....,... I.,.... 10, 11
@I TROUBLESl-fOOTlNG . . . . . . . . . ..o.............. 12
a SPECIFICATIONS 13
(1) Operating Instructions ..................................................... .I
(2) Warranty ....... , ............................................................... ,‘I
(3) Kemote Control Unit (RC-858) ........................... . ................ .I
(4) Batteries I?03 (AAA) ...................................... , .................. .
(5) Power Supply Cord
...........................................................
:I
(6) Service Station List
...........................................................
.I
For heat dispersal, leave at least 10 cm of space between the top,
back and sides of this unit and the wall or other components.