12
About the photos used for "descriptions of the DISASSEMBLY" section
• The direction from which the photographs used herein were photographed is indicated at "Direction of photograph: ***"
at the left of the respective photographs.
• Refer to the table below for a description of the direction in which the photos were taken.
• Photographs for which no direction is indicated were taken from above the product.
1. REMOTE I/O UNIT
(1) Disconnect the connector wire, then remove the screw..
2. P.AMP(L) UNIT
(1) Disconnect the connector wires, then remove the screws.
The viewpoint of each photograph
(Photografy direction)
[View from above]
Front side
Direction of photograph: B
Direction of photograph: D
Direction of photograph: C
Direction of photograph: A
TOP COVER
REMOTE I/O UNIT
→
Proceeding :
TOP COVER
P.AMP (L) UNIT
→
SIDE COVER (L)
→
Proceeding :