Denon PMA-2020AE - Technical Specifications Overview; Power Amplifier Section Specifications; Pre-Amplifier Section Specifications; Overall Performance and General Specs

8
TECHNICAL SPECIFICATIONS
n
Powerampliersection
Rated output power : 2-channel driving (CD → SP OUT)
80 W + 80 W (8 Ω, 20 Hz – 20 kHz, T.H.D. 0.07 %)
Dynamic power : 160 W + 160 W (4 Ω, DIN, 1 kHz, T.H.D. 0.7 %)
High frequency distortion : 0.01 % (Rated output: –3 dB), 8 Ω, 1 kHz
Output terminals : Speaker A or B: 4 – 16 Ω
A + B: 8 – 16 Ω
Suited for headphones/stereo headphones
Input Sensitivity / Input Impedance : P. DIRECT: 0.9 V / 47 kΩ
Amplication factor: 29 dB
n
Preampliersection
Equalizeramplieroutput(RECOUTterminals):150 mV
Input sensitivity/Input impedance :
PHONO (MM): 2.5 mV/47 kΩ
PHONO (MC): 200 μV/100 Ω
CD, TUNER, AUX, NETWORK, RECORDER-1, RECORDER-2:
135 mV / 47 kΩ (SOURCE DIRECT OFF)
135 mV / 23 kΩ (SOURCE DIRECT ON)
RIAA Deviation : PHONO : 20 Hz – 20 kHz ±0.5 dB
Maximum Input : PHONO (MM): 130 mV/1 kHz
PHONO (MM): 10 mV/1 kHz
Rated Output : PRE OUT: 0.9 V (Input CD 135 mV)
n
Overall performance
S/N Ratio (A network) :
PHONO (MM): 89 dB
(With input terminals short-circuited, 5 mV input signal)
PHONO (MC): 74 dB
(With input terminals short-circuited, 0.5 mV input signal)
CD, TUNER, AUX, NETWORK, RECORDER-1, RECORDER-2,:
108 dB (input terminals short-circuited)
Tone control (bass) : BASS: 100 Hz ±8 dB
TREBLE: 10 kHz ±8 dB
n
General
Power supply : AC 230 V, 50/60 Hz
Power consumption : 360 W
0.2 W (Standby)
z
For the purpose of improvement, the specications and design are
subject to change without notice.
Unit : mm
394.0
434.2
261.3 2.365.96
20.0
161.5
181.5
434.0
344.0
61.0
45.045.0
26.0 14.2
Weight : 24.4 kg
DIMENSION