Selecting the input source
1
Press INPUT SELECT to select the input source to be
played.
The selected input source is displayed on the display of this unit.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Press VOLUME df to adjust the volume.
0
You can also adjust the master volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE.
“MUTING” is displayed on the display of this unit.
0
To cancel mute, press MUTE again.
Adjusting the tone
1
Press SOURCE DIRECT on the main unit to turn off
source direct mode.
The SOURCE DIRECT indicator turns off.
2
Turn the BASS, TREBLE and BALANCE to adjust the
tone.
Contents Connections Playback Settings Tips Appendix
27
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
